ACSizeCheck

What size AC for Snyder, TX? 4 tons for 2,000 sq ft

What size AC a 2,000 sq ft house in Snyder needs

4 tons central AC or heat pump, about 43,000 BTU/hr of load

Here the 20 BTU per square foot chart lands close: 3.5 tons against a load of 3.6 tons. This is one of the climates the chart was written for.

If a contractor quotes you more than 4 tons for an average 2,000 sq ft house here, ask to see the Manual J load calculation behind it before you sign. That works out to one ton per 558 square feet in this climate. For a single room, size by the room: 21.5 BTU/hr per square foot.

The climate it is sized for

Climate from NOAA's 1991 to 2020 normals at Snyder (0.3 mi away). Jul is the hottest month, averaging a high of 95.6°F and a low of 70.3°F, with about 101 days a year at 90°F or more. That gives a design temperature of 103°F against 75°F inside.

What it costs to run

About 3,343 kWh a year at SEER2 14.3, or roughly $536 at Texas's average residential rate of 16.03¢ per kWh. Cooling runs 7 months of the year here.

What drives the load in Snyder

Of the 43,000 BTU/hr, 20,160 comes through walls, roof and windows on a 103°F afternoon (47%), 13,000 is sun on the house (30%), 2,120 is four people and their appliances, and 7,800 is moisture the coil has to wring out of Snyder's summer air (18%).

Heat through the shell is the biggest share here, so insulation and air sealing cut the size you need more than shading would. Sensible heat totals 35,280 BTU/hr before the moisture allowance.

Other house sizes in Snyder

HouseLoad, BTU/hrSize20 BTU/ft² chart
1,000 sq ft22,8002 tons2 tons
1,500 sq ft32,9003 tons2.5 tons
2,500 sq ft53,2005 tons5 tons
3,000 sq ft63,3005 tons5 tons

Single rooms with a window or mini-split unit: a 150 sq ft bedroom needs about 3,200 BTU/hr; a 350 sq ft living room needs about 7,500 BTU/hr; a 600 sq ft open plan kitchen and family room needs about 12,900 BTU/hr.

Month by month in Snyder

MonthAvg highCooling degree daysAC kWh
Jan57°F00
Feb61.5°F22
Mar69.7°F1724
Apr78.3°F76113
May85.7°F250369
Jun92.4°F443653
Jul95.6°F556820
Aug94.4°F526775
Sep87°F297438
Oct78°F94138
Nov66°F710
Dec57.7°F00

Jul alone uses 25% of the year's cooling energy. The unit runs the equivalent of 1,111 hours a year at full output.

Snyder against nearby cities

CityDistanceDesign daySize for 2,000 sq ft
Sweetwater, TX34 mi102°F4 tons
Big Spring, TX47 mi104°F4 tons
Abilene, TX71 mi104°F4 tons
Lubbock, TX81 mi100°F3.5 tons
Midland, TX85 mi104°F4 tons
San Angelo, TX92 mi105°F4 tons

Of 252 Texas cities here, Snyder has the 221st highest cooling load. The range runs from Levelland at 37,300 BTU/hr to Laredo at 51,500.

Where Snyder's weather numbers come from

The nearest NOAA station with full 1991 to 2020 normals is Snyder, 0.3 miles from the center of Snyder at 2,319 ft above sea level. That is close enough that the station's summers are Snyder's summers.

No other city in this set uses Snyder, so this sizing is Snyder's alone.

The sun over Snyder in late July

At 32.71°N, the noon sun on 21 July stands 77.7° above the horizon over Snyder and the day runs 13 h 51 min from sunrise to sunset. A lower noon sun puts more of the day's heat on east and west walls than on the roof, which is why shading west glass pays off here. Shorter days give the house a longer night to shed the day's heat.

11,151 people live in Snyder, the 229th largest of the 252 Texas cities sized on this site. Coordinates used: 32.7136, -100.9119.

Snyder AC sizing questions

What size AC does a 2,000 sq ft house in Snyder, TX need?

About 4 tons, for a cooling load of 43,000 BTU/hr on a 103°F design day. That is one ton per 558 square feet in Snyder's climate.

Is 20 BTU per square foot right for Snyder?

The chart gives 3.5 tons for 2,000 sq ft, against 4 tons sized from NOAA's 1991 to 2020 normals at Snyder. For a single room here, plan on 21.5 BTU/hr per square foot.

What does central AC cost to run in Snyder?

About $536 a year: 3,343 kWh at SEER2 14.3 and 16.03¢ per kWh, over 7 cooling months.