What size AC for Butler, PA? 2 tons for 2,000 sq ft

What size AC a 2,000 sq ft house in Butler needs

2 tons central AC or heat pump, about 24,900 BTU/hr of load

The 20 BTU per square foot chart would put in 3.5 tons, about 69% more than this climate needs. An oversized unit cools the air fast, shuts off before it pulls moisture out, and leaves the house cold and clammy.

If a contractor quotes you more than 2 tons for an average 2,000 sq ft house here, ask to see the Manual J load calculation behind it before you sign. That works out to one ton per 965 square feet in this climate. For a single room, size by the room: 12.4 BTU/hr per square foot.

The climate it is sized for

Climate from NOAA's 1991 to 2020 normals at Butler 2 Sw (1.7 mi away). Jul is the hottest month, averaging a high of 81.7°F and a low of 58.2°F, with about 7 days a year at 90°F or more. That gives a design temperature of 86°F against 75°F inside.

What it costs to run

About 626 kWh a year at SEER2 14.3, or roughly $132 at Pennsylvania's average residential rate of 21.13¢ per kWh. Cooling runs 3 months of the year here.

What drives the load in Butler

Of the 24,900 BTU/hr, 7,920 comes through walls, roof and windows on a 86°F afternoon (32%), 13,000 is sun on the house (52%), 2,120 is four people and their appliances, and 1,800 is moisture the coil has to wring out of Butler's summer air (7%).

Sun is the biggest share here, more than heat through the walls, so shading west windows and a light roof cut the size you need more than extra insulation would. Sensible heat totals 23,040 BTU/hr before the moisture allowance.

Other house sizes in Butler

Single rooms with a window or mini-split unit: a 150 sq ft bedroom needs about 1,900 BTU/hr; a 350 sq ft living room needs about 4,300 BTU/hr; a 600 sq ft open plan kitchen and family room needs about 7,400 BTU/hr.

Month by month in Butler

Jul alone uses 35% of the year's cooling energy. The unit runs the equivalent of 360 hours a year at full output.

Butler against nearby cities

Of 68 Pennsylvania cities here, Butler has the 62nd highest cooling load. The range runs from St. Marys at 21,700 BTU/hr to Philadelphia at 34,300.

Where Butler's weather numbers come from

The nearest NOAA station with full 1991 to 2020 normals is Butler 2 Sw, 1.7 miles from the center of Butler at 1,000 ft above sea level. That is close enough that the station's summers are Butler's summers.

No other city in this set uses Butler 2 Sw, so this sizing is Butler's alone.

The sun over Butler in late July

At 40.86°N, the noon sun on 21 July stands 69.5° above the horizon over Butler and the day runs 14 h 30 min from sunrise to sunset. A lower noon sun puts more of the day's heat on east and west walls than on the roof, which is why shading west glass pays off here. Long days mean the house keeps gaining heat into the evening, well after the outdoor peak.

13,010 people live in Butler, the 49th largest of the 68 Pennsylvania cities sized on this site. Coordinates used: 40.8616, -79.8962.

Butler AC sizing questions